Silicone Fiberglass Sleeving
Home>Silicone Fiberglass Sleeving
Silicone Fiberglass Sleeving
      Silicone fiberglass sleeving is braided with E fiberglass yarn into tube blank, coated with silicone rubber solution and heated to vulcanize into insulation sleeving. It has comparative dielectric performance, higher heat resistance, excellent elasticity, cold resistance and resistance to aging. It is applicable to wiring and mechanical protection for H grade electrical motor and electrical equipment with higher requirements.
Specification:
Inner Diameter
Thickness
Nominal(mm)
Tolerance
Min
Max
0.5、0.8
±0.10
0.20
0.50
1.0、1.5
±0.15
0.20
0.75
2.0、2.5、3.0
±0.20
0.20
0.75
3.5、4.0、5.0、6.0
±0.25
0.30
0.75
7.0、8.0、9.0、10.0
±0.25
0.30
0.10
12.0、14.0、16.0、18.0、20.0、23.0
±1.00
0.40
1.20
25.0、27.0、30.0
±1.00
0.40
1.40
Remark: Special specs can OEM according to requirements.
COPYRIGHT©2011 HZ-MINGDA.COM CORPORATION ALL RIGHTS RESERUED
            点击这里可以给对方发送消息